banner

Mercedes Benz Conductor Plate Replacement and Reprogramming

Mercedes Benz Conductor Plate Replacement and Reprogramming

What is Mercedes Benz Conductor Plate Replacement and Reprogramming?

Although Mercedes Benz transmissions are typically very reliable, there are times when they develop glitches. Transmissions in Mercedes Benz cars and SUV’s utilize five forward speeds that are computer-controlled that implement adaptive shift learning to continually fine-tune vehicle shifting. Sometimes communication or mechanical issues can cause the system to not work efficiently. In most cases on these vehicles, the service required to resolve this issue is Mercedes Benz Conductor Plate replacement or reprogramming.

Noted below are some important facts about the Conductor Plate, what it does, the issues they create and the solutions that a San Diego Mercedes Benz repair specialist can complete to resolve problems.

First – What is a Mercedes Benz Conductor Plate and What Does it Do?

The conductor plate is a vital component of the Mercedes Benz adaptive shift learning automatic transmission program. It’s attached on top of the transmissions valve body and is made up of six individual solenoids and two speed sensors. This component collects data from other sensors throughout the vehicle and transmits information to the ECU. By continuing to collect information on the fly, the vehicle is able to smoothly shift into higher or lower gears to maximize comfort, increase overall vehicle performance and ensure a smooth ride is maintained at all times. When this component fails, it will require Mercedes Benz conductor place replacement or reprogramming; which can only be completed by a San Diego Mercedes Benz specialist.

Second – What Cause this Component to fail?

In most cases, the plate itself is not damage. It is typically one or both speed sensors attached to the conductor plate that becomes damaged or faulty. A few common causes of this type of damage may include:

  • Higher transmission temperatures
  • Oil leaking onto sensors and creating a ‘wicking effect’
  • General wear and tear

When the speed sensors fail, they do not relay the data to the ECU to make adjustments in the shifting process. This tends to create what’s known as a “limp mode”; which essentially restricts the engine and transmissions ability to apply power to the wheels, so you can drive safely to a Mercedes Benz repair specialist to properly diagnose the transmissions problems.

Third – What are the solutions to fix a Conductor plate issue?

There are two specific ways of resolving transmission problems related to this component. If the problem is diagnosed as a simple communication error, then the ECU and conductor plate and be reprogrammed. If damage has occurred to any portion of the conductor plate, the entire unit must be replaced. Staying ahead of routine transmission maintenance is one great way of avoiding Mercedes Benz Conductor Plate Replacement and Reprogramming services. If you ever experience a situation where your Mercedes Benz is driving less than 20 mph, contact a local Mercedes Benz specialist as soon as possible.

I have been using San Diego Bimmer MB since 1994. They are reasonable and honest and the mechanics are knowledgeable. Andy, Eva and Conrad are a pleasure to work with and go out of their way to accomodate my needs. i highly recommend their business. Molly McConnell

,
icon icon icon icon icon

Really Great service here. I was in a time crunch and the guy (young tall male) expedited the process for me. Seemed like a family run business, everyone very friendly and accomodating. I would certainly go back, and am referring my roommates and friends go there when they need to as well!

,
icon icon icon icon icon

Took my Nissan Altima in because it had a small, but growing, oil leak. They fixed it rather quickly and for much cheaper than a quote I received from another shop. I would recommend them to anyone. Infact, once the manufacturer's warranty is over on my other car, I will probably start taking it here!

,
icon icon icon icon icon

They are great!!! I take my Mercedes only to them now. Real parts, great honest people, don't be fooled by the building they know what they are doing and at half the cost or more than the dealer!!!!!!!!

,
icon icon icon icon icon

a small dinky lot with excellent customer service and great work on very technical, module related work on recent Audis. A great experience after a number of major let downs from the only Audi dealership on a very shiny lot within 20 miles.

,
icon icon icon icon icon

I have been taking my last 2 vehicles there for the past 10 years and the service and workmanship is top-notch.

,
icon icon icon icon icon

They can be pricy but their service can't be topped

,
icon icon icon icon icon

It's a wonderful place when you need work done on the car. They are friendly, efficient, and able to solve any problem.

,
icon icon icon icon icon

You will always be well taken care of at San Diego Bimmer MB.

,
icon icon icon icon icon

I have been going to Adams Avenue Imports for years and highly recommend them. First I was taking my Toyota Camry and more recently my Audi A4. They have always fixed whatever problem I've had for a fair price in a reasonable amount of time. They are a pleasure to deal with - honest, reliable and even kind.... Recently I had an estimate for work from the dealer, and Adams Ave. Imports did the same work for a much lower rate. They are good people who do good work.

,
icon icon icon icon icon